Motorcycle Jacket Maintenance Tips

Some maintenance tips are not necessary. Nylon jacket is clean most of the world with just a sponge and some soapy water or a brush to lightly woven into one of Cordura (this textile has indeed a larger frame and dirt can stays inside ). Avoid washing machines and worse, accelerated drying in a dryer or near a radiator because the fibers will tighten, inserts melt and the garment will be good to throw! You simply let the coat dry in a ventilated place, hanging on a coat.

For effective cleaning, remember to remove the liner and remove the protections (they are removable but locate their prior position). Most jackets have a hydrophobic treatment that repels moisture, but also fat. It is useful from time to time to spray a waterproof product adapted (found in department stores or sports stores). A tear may have severe consequences because if the insert is torn waterproof, water will penetrate the lining and quickly spread to the whole garment. A repair is possible but it is better to entrust it to a professional.

How to choose motorcycle jacket

If for a long time the good old leather jacket was the garment standard motorcycle, the last several years an explosion of textile equipment. The low cost of nylon over leather was in effect. Rugged, very good resistance to traction, very lightweight, the nylon used alone is not very appropriate because it does not protect from humidity, has a relatively low thermal protection, and if you fall, it offers little resistance to abrasion. But, so much the better for the rider, many other fibers were used to address specific problems: fiber waterproof (Gore-Tex, Reiss, Hipora, Sympatex) are barrier to rain, others make it possible evacuate perspiration (Tactel, 3Xdry, Coolmax) and liners provide warmth (Polartec, Polarguard, Primaloft, Thinsulate 3M). And to protect the biker, Nylon base is often reinforced by a nylon dense and more resistant, the Cordura. There are sometimes reinforced Kevlar or Keprotec, or even pieces of leather sewn in strategic locations.

Please note that all coats and jackets are all fitted with removable protection (of semi-rigid shell) and ridges generally foam anti-shock. But beware, it is sometimes marketing arguments and we can not know the effectiveness of its protections to achieve less than a test or even in Wallowing!
Some meet de facto standards EC (European Community) and therefore have a real capacity to absorb shocks. Other (as is often the case backbones), are merely slabs of foam tear very easily. But it goes in the right direction, it is clear that real efforts have been made by manufacturers.

However, the nylon is not leather. The latter is a true second skin, which is not the case for synthetic textiles, in the event of a fall, have a fatal defect: they melt. If the lining of the garment itself is nylon (or woven into the fibers of the same families as polyamides), the heat is communicated to the lining and, in the worst cases, skin!